VS NAILS Pedicure Wraps Nr153

Pedicure Film Application Guide

The films can be applied to:

Bare nails (lightly buffed and degreased).
Gel polish base (remove the sticky layer beforehand).
Strengthened nails.
Regular nail polish (must be completely dry before applying the film).

Preparation:

Perform a pedicure before applying the film.
Thoroughly degrease the nail and remove any dust.
If using a gel polish base, remove the sticky layer.
If applying over regular nail polish, ensure it is fully dry.
Choose the correct film size based on the widest part of the nail plate using a ruler.

Application Steps:

1 Lifting the film: Use a wooden stick or pusher to gently lift the film from its base.
2 Shaping: Slightly bend the film to create an arch.
3 Placement: Fix the film in the center near the cuticle and smooth it from top to bottom.

Important! Avoid creases. If a crease forms, gently lift the film and stretch it slightly to smooth the surface.

4 Securing the film:

• Press the film under the free edge of the nail.
• File off the excess material in one direction to prevent frayed edges.

Film Coating Options:

1 Without a topcoat.
2 Regular clear nail polish.
3 Gel polish base + top coat (thin layer).
4 Gel polish top coat (thin layer).

Film Removal Methods:

1 Gel polish remover (for soft removal).
2 Acetone with a cotton pad and foil (leave it soaked for a sufficient time).
3 Filing with a drill bit or nail file (if a gel polish base was used as reinforcement before applying the film).

If using a soaking method, do not forcefully pull off the film! It should easily lift off to prevent nail plate damage.

A perfect and effortless nail design alternative!