MARATHON ESCORT II PRO (Mint) H200 (30000 rpm)

A producer who knows his stuff
The Saeyang brand offers high-quality tools for professional manicure and pedicure treatments. Saeyang products, highly valued by cosmetologists, are characterized by excellent craftsmanship, precision, and innovative solutions.

A model that will serve you

The Marathon Escort II Pro version offers the latest technological applications and the unique H200 handpiece. You can count on quiet operation and no disturbing vibrations. The speed mechanism is controlled by a knob, and the number of revolutions ranges from 0 to 30,000 rpm. The system is automatically protected against overload.

Intuitive operation

What distinguishes Marathon products is their extremely easy operation, which can be understood immediately. After connecting the device to the power supply and attaching the handpiece, simply turn on the power button and then adjust the speed with the knob. On the front, there is also a FWD/REV button to change the direction of rotation of the cutter. The handpiece can be placed in the attached holder or on the silicone base.

Twist-Lock: Easy cutter change

Forget about using keys and pins! The Twist-Lock handpiece is a solution that allows you to quickly and easily change the cutter with one movement. Turn left to unlock, loosen, and change the cutter. Turn right to close the lock and secure the cutter.

Original Marathon product

Warranty: 12 months for the control unit and 6 months for the handpiece.

Technical Data:

• Model: ESCORT II PRO(Control unit)
• Input: AC 220~240V, 50/60Hz
• Weight: 1,250 g
• Dimensions: W134 x D154 x H82.4

Handpiece model: SDE-H200

• Speed: 030,000 rpm
• Max Torque: 2.9Ncm
• Weight: 150 g
• Dimensions: L129 x 22

The set includes:

• Milling machine base
• Handpiece
• Head holder
• On/off foot pedal
• Silicone head stand
• Instructions

USAGE AND MAINTENANCE:

• Change the rotation direction to reverse ONLY after the motor has COMPLETELY STOPPED and switch the FWD/REV button.
• Always stop the speed completely before changing the cutter.
• Cutter diameter is 2.35 mm, minimum length is 10 mm.
• Do not use rusty or damaged cutters as this may cause premature wear of the micromotor bearings.
• Do not install a wet or dusty cutter in the micromotor.
• ALWAYS STORE the micromotor with the cutter installed.
• Avoid damaging the device.
• NEVER turn on the micromotor without a cutter or nozzle.
• NEVER immerse or wash the micromotor.

What to do:

At the end of each workday, it is necessary to:

• Clean the external parts of the device with a soft cloth using alcohol-based cleaning fluids or a vacuum cleaner.
• Clean the exposed cutter with a brush.
• Periodically perform regular maintenance: cleaning, adjustments, brush replacement, etc.
• The cleaning frequency depends on the devices usage intensity and conditions.
• The recommended frequency for professional use is at least every three months.
• Cleaning should be done by a qualified technician.
• If any operational issues arise, immediately contact the Nailinfinity service center.